Hitachi Compressor Part 16pk1580 V-Belt Air Compressor Part
|FOB Price:||US $18 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $18/ Piece|
|Production Capacity:||5000 Units Per Month|
|Transport Package:||Neutral Package|
|Payment Terms:||L/C, T/T, D/P, Paypal, Western Union|
- Model NO.: 16pk1580
- Feature: Wear-resistant, Heat-resistant, Tear-resistant, Flame-resistant
- Performance: Strong Rubber Conveyor Belt
- Product: Rubber Belt
- Apply Range: Industrial Manchinery
- Main Material: Rubber
- Warranty: Half a Year for All Spare Parts
- Name: V-Belt
- Specification: CE, SGS
- HS Code: 84149090
- Type: Sealing Belt
- Usage: Electrical Insulating Tape
- Brand: Hitachi
- Part Number: 16pk1580
- for: Air Compressor Part
- Tape: V-Belt
- MOQ: 1PC
- Trademark: hitachi
- Origin: China
Compressor Drive V-Belt Air Spare Parts
Screw Air Compressor Belt / High Quality Belt
belt driven air compressor
v belt air compressor
2.Excellent trough ability
3.Good wet strength
Ribbed belt has soft and tough property as flat belt and tight and effective property as V belt.
· Transmission power so high that at the same condition its 30% higher than common V belts.
· With tight transmission system, at the same transmission power, its occupied space is 25% smaller than common V belt.
· Flat and soft belt is suitable not only for transmission of small pulley but also for high-speed transmission with speed of 40m/s, Besides its characteristics as slight vibration, few heat diverge and steady working.
Anti-heat, anti-oil, anti-wearing out few elongation and long life
|type||pitch||hinghth of ribs(fact)||hinghth of ribs(theory)||total thickness||angle||root angle||top angle|
|Mechanical Seal :||Temperature Sensor||Pressure Sensor|
|Maintenance Kits||Solenoid Valve||Thermostatic Valve|
|Air intake||Wheel Gear||Pressure Maintaining Valve|
|Air Filter||Oil Separator||Oil Filter|
|Oil Level Indicator||Circuit Board Master Control||Air intake valve|
|Used air compressor||Air-end||Oil level indicator|
Dongguan City Jiubei Compressor Parts Co., Ltd was established in 2000, located in Dongguan city Changan town - "China National Machinery and Hardware Mold town".
We are a Hi-Tech company specialized in research, development, manufacture and distribution of Air compressor spare parts. With our rich experience, professional technology and rigorous quality control, our products has been widely used in various brand air compressors, such as Atlas Copco, Hitachi, Sullair, Kobelco, Fusheng with good feedback and continuous orders from more than 2,000 customers in domestic and oversea marketing
Mechanical Seal Temperature Sensor Pressure Sensor
Maintenance Kits Solenoid Valve Thermostatic Valve
Air intake Valve Pressure Maintaining Valve Wheel Gear
Air Filter Oil Separator Oil Filter
Oil Level Indicator Circuit Board & Master Controller
1:why oil spilling
First, the compressor seals or seal off the defect guide (such as wear and tear, etc.) caused by the oil spill.
Second, the compressor shaft seal leakage loose lead.
Third, the combination of surface leakage air compressor head, inlet pipe, return pipe joints loose. Fourth, the compressor installation process to install the belt too tight cause main bearing wear. Fifth, the air compressor casting or machining production process is not perfect.
2,When we experience oil in our compressed air, the separation process isn't working optimally.
There could be many different reasons for this. Here are the most common ones:
Too high oil level
This is a temporary problem. Once enough oil has 'carried over' and the oil level drops to normal levels, the carry over stops.
Too high temperatures
If the compressor is running at high temperatures (100 - 120 degrees Celsius), it can result in an higher oil carry over rate.
With normal running conditions, separators need to be replaced very 6000 - 8000 running hours. That's once per year or once per two years for most compressors.
When the separator becomes old, it becomes 'saturated'. The filter fabric is filled with oil. It's time to replace your separator, otherwise you risk the chance of an separator failure or collapse!